You get a straight answer on cost up front, with every line explained and nothing hidden.
Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
You focus on your home. We put together the photos, readings and reports your insurance company needs.
Most people who call us have never dealt with hardwood floor water damage before. We walk you through it on the phone, then send a local crew with the right equipment.
Hardwood responds fast when it gets wet. As the wood absorbs water along its edges and bottom face, it expands, crowds the neighboring boards and cups, leaving the center lower than the sides. Cupping alone is no reason to give up on the floor. Solid hardwood that is dried in the first few days often flattens back out. What matters is removing moisture from the wood and from its subfloor steadily and under control.
We dry hardwood with floor drying mats. Each mat is sealed against the floor and hooked to a vacuum unit, which pulls moisture upward through seams and boards as dehumidifiers dry the air in the room. Compared with carpet or drywall it is slower, commonly a week or more. No sanding should happen before the wood has dried completely. A cupped floor sanded early ends up crowned afterward.
We save what can be dried properly and remove only what cannot. Moisture readings make that call, not guesswork.
Call (574) 369-6058| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Engineered hardwood | A short spill on top that left the plank edges unswollen | Any plank peeling into layers, puffed at edges or damp beneath |
| Plywood subfloor | Wet but flat and firm, dried to a normal reading | Delaminated plies, spongy areas or mold you can see |
| Solid hardwood | Cupped boards still fastened down, when drying starts within days | Sewage exposure of any kind, or wood that is split, black or buckled |
| Baseboards and shoe molding | Wood baseboard removed for drying and put back undamaged | Swollen or crumbling shoe molding and MDF base |
| OSB or particle board | Panels of OSB with edges still flat and unswollen | OSB with puffed edges, and almost all particle board that got wet |
Our team meters the wet boards, the subfloor under them and a dry area of floor to compare against. That tells us how deep the water went and whether saving the floor is realistic.
Standing water is extracted right away and rugs and furniture are moved off the wet area. Cutting off the water entering the joints early keeps swelling down.
We tape drying mats to the floor and attach them to a vacuum system, which draws moisture upward through the wood. The room is managed with dehumidifiers so drying stays even and the boards do not crack.
Every day or two we take new readings, continuing until the subfloor and boards match the dry reference spots. Then we tell you whether the floor needs refinishing, a few boards replaced, or nothing.
Seams let the water through, and it fans out in the layer between flooring and subfloor. Underneath, the wood remains wet even after the face has been dried.
Boards swell and the edges rise. You might notice haze in the topcoat. Growth is able to begin below, on raw wood and on the subfloor panels.
Expanding boards push harder and harder on one another. Boards crush against each other, fasteners loosen and sections can begin to lift off the subfloor.
Buckling, black staining and mold under the boards become likely. At this stage most of the wet area needs to be replaced rather than dried.
Between the boards and the subfloor there is only darkness and still air. Growth there is invisible from above and shows up first as a musty smell.
Nails and staples that stay wet begin to rust and lose holding power. Dark marks from that rust soak into the boards and can be too deep to sand out.
Sanding cupped boards flat while they are still wet removes the raised edges. After the moisture leaves, each board is left with a raised center, which is crowning.
Water under a floor travels. Next door rooms, the area under cabinets and walls, and the ceiling below are all places it can end up.
Not seeing your question? Call and ask. It costs nothing to talk it through.
Call (574) 369-6058Don't wait for small problems to become expensive emergencies. Call Springfield Restoration Pros for fast, reliable service.
Call (574) 369-6058 Now